Having a plumbing issue is an unavoidable part of house ownership. The deterioration of fixtures and the usual wear and tear of plumbing equipment can lead to some problems, but the way particular systems are used and maintained can also be blamed.

A good plumber has the know-how to help you through both common and rare issues. Some of the most common problems you’ll encounter, and information on why they occur and what may be done about them are listed here.

Drain and toilet clogs

When you use the sink or the shower, you can see if the drains are clogged if the water starts to back up. The symptoms of a clogged toilet are usually more apparent right away. The moisture accumulates in the bowl and may even overflow if the flush fails. Clearing the obstruction often restores your drains or toilets to normal with a bit of elbow grease or a visit from a plumber.


How the Problem Occurs:
Slow or clogged drains are caused by obstructions in the drainage system. While hair is the most common offender in bathroom sinks and showers, other objects like shampoo lids or tiny toys can also get stuck in the drain and cause a blockage. In toilets, a common problem is when non-dissolvable waste is flushed down the drain. Water can’t get past the obstruction since those tangible things cannot pass through the pipe and remain in place.


How to Unclog a Toilet and Clear a Drain:
The first step is to use a plunger to clear the obstruction. A plunger can service both toilets and drains. Air pressure is used to dislodge clogs using this simple plumbing equipment. As you move the plunger’s end over the drain, you’ll create suction. With tweezers or pliers, you can remove the clump from the gutter to get close enough. Drain obstructions can be cleared with chemical drain cleaners available over the counter. Plumbing snakes, available at home improvement stores, can be used to clear blockages and restore water flow.


To keep drains and toilets clear, here are a few tips:
Only flush dissolvable trash into the bathroom to avoid clogs. Avoid heavy flushing items down the toilet by keeping a close eye on your children. Avoid the temptation to flush anything that accidentally falls into the bathroom. When taking a shower, place a hair catcher over the drain to keep stray hairs from the plumbing. To prevent clogs, keep hair out of the sink.


Calling a Plumber:
If the homeowner cannot clear them, clogged drains and toilets should be left to the professionals. You should call Professional Plumber Brea if you keep getting clogged drains in the same place. Over time, constant use of caustic drain cleaners can cause pipe damage. You may be able to prevent future clogs by having an expert plumber handle the Problem without damaging the pipe.

Faucets and pipes that break

Plumbing issues such as dripping faucets and pipes are typical in residential and commercial properties. Your water bill might be reduced by up to 10% if you quickly fix leaks in your house. The plumbing system leaks causing a lot of concern aren’t as bad as they first appear. Over a year, a single drip every second adds up to 180 showers. In the United States, plumbing leaks waste an estimated 1 trillion gallons each year. When the faucet is turned off, water drips out of it, making it easy to identify if it is leaking. It’s easy to hear the drips even if you’re not there.

Leaving a leak in your pipes unchecked can do a lot of harm. After some time, a puddle or dripping sound may indicate that a pipe is leaking.


How the Problem Occurs:
The most common reason for dripping faucets is a problem with the washer that seals the tap, which can be easily replaced. Dislodging, ripping, and stiffening are all examples of damage—small amounts of water drip from the faucet when the washer is damaged in this way. As the valve seat ages, it may begin to degrade or corrode. A junction is the most likely place to find a leaky pipe. Water pressure, degradation, shifting, and other factors can lead to leaks.


How to fix leaky pipes:
Leaky faucets and pipes can be fixed by replacing the washer, causing them to drip. You can do this yourself, but hiring a plumber to replace the washer using specialized equipment is more accessible. It’s possible to fix a leaking pipe in minutes or hours. To avoid a significant mess, it’s best to leave even an essential U-joint replacement to a professional.


Tips for Preventing Faucet and Pipe Leakage:
It’s impossible to prevent everyday wear and tear. Faucets will inevitably begin to leak over time. Slowly turn the taps on and off and avoid putting too much pressure on the knobs to reduce wear. It is important to perform preventative maintenance on your plumbing system to be aware of any potential issues. Find any signs of moisture or little drips. Leakage may be indicated by the presence of rust or white lime deposits.


Calling a Plumber:
When in doubt, call a professional to replace the washer if you’re not familiar with plumbing. Looking for Plumber Brea can clean up for you if the project is too large or you don’t want to deal with it yourself anymore.

Issues relating to the water heater

Problems with a water heater are usually quite obvious. When you get in the shower, you expect a nice, warm blast of water, but instead, you get a blast of very cold. In addition to leaks and puddles, look for discolored water and strange noises emanating from the water heater. However, due to the intricacy and potential risk, many water heater problems and repairs necessitate professional assistance.


How the Problem Occurs:
When a leak occurs, it can lead to problems with the water heater, such as not having enough hot water. Water heaters can potentially be affected by mineral deposits. Water heater efficiency can be reduced by the buildup of deposits, resulting in less hot water available in your home. A buildup of scale on your water heater’s heating components or the explosion of silt can result in unusual sounds coming from your water heater.


When troubleshooting a faulty water heater:
Check the pilot light. For the machine to produce hot water, the pilot light must be kept lit. Make sure that the thermostat hasn’t been unintentionally lowered. It is best to flush out the water tank if you detect mineral buildup. Plumbing professionals will know that a leaking storage tank needs to be fixed as soon as possible if there is standing water all over your flooring.


How to Prevent Problems with the Water Heater:
Keeping your water heater in good working order is essential to avoid complications. Ensure that the pressure valve is always in good operating order. To keep silt from building up, run the tank underwater regularly. Check for drips and leaks around the tank regularly to rule out more serious issues.

Conclusion

Preventing and fixing any of these problems before they become major ones is the good news. Watch for warning indications from your plumbing. If you’re having trouble, don’t hesitate to contact a professional who can assist you in getting your plumbing system up and running again.

Author Bio:- Angela Louise Angela is a marketing manager at EZ Plumbing USA. She has a great interest in educating readers about various leakages that can happen in their home or offices through her articles. With extensive knowledge of water leak and slab leak detection techniques as well as HVAC systems, Angela wants to make readers aware about the warning signs indicating leakage and predictive AC and Heater maintenance and also how to fix them to refrain from dangerous and costly consequences.

Read articles to get more valuable information about detection and damages of water and slab leak repair, techniques to fix clogging, and installation and maintenance of AC & Appliance in San Diego.

Facebook: https://www.facebook.com/EZPlumbingUSA/

Twitter: https://twitter.com/EZPlumbingUSA1

Apart from this if you are interested to know more about 3 Signs That Show You Need Emergency Plumbing Services then visit our Daily Bites category